本企业分站入口
扬州 连云港 南通 苏州 常州 徐州 无锡 南京
更多>>>

Hello, welcome to jiangnan machinery co., LTD.   

HOME|RSS|SITEMAP|CHINESE
Jiangyin City Jiangnan Light Industry Machinery co.,Ltd is located in jiangsu province of china, a beautiful and prosperous region with rivers and lakes in south of china. It is nearby jiangyin Yangtze river highway bridge, Beijing-Shanghai Expressway, shanghai-nanjing expressway.
Goods details
JYZLM90-1600 Printing And Coating Laminating Machine

JYZLM90-1600 Printing And Coating Laminating Machine
Introduction
This equipment is mainly used for surface printing and coating process of roll paper and such products, for example: packing paper and so on.
Main technical parameter
1.Screw and barrel: diameter 90mm, L/D:32:1, material: 38CrMoAl,hardness treatment, surface with nitride, with special mixed segment, great effect, high capacity;
2. “T” shape stretchy mould: new type featheredge mould,Material: 5CrNiMoV, surface with chrome treatment, excellent in toughness and hardness, be not out of shape with high temperature frequently ;
3. The gear box of extruder motor adopts high strength hard teeth retarder with high obturation;
4. Omron Intellectualize digital corona treatment;
5. Scope: 40gsm ~ 120gsm roll paper material;
6. Coating material: PE,PP;
7.Printing and  Coating  width : 1100~1600mm;
8. Thickness of coating: 0.012~0.035mm(single layer);
9.Symmetrical degree of coating: +6%;
10. Peel off strength: 3-5N/30mm(according to the coating  basic material);
11. Max extruding capacity: 220kg/h(single unit);
12. Machine design speed: 0~100m/min;
13.Unwinding system uses a two-axle duplex-rollover broadcasting form, cutting and changing rollers without lower the speed, tension with the most advanced vector frequency conversion motor control (PLC module control) technology, correction system uses a car-type automatic correcting device (EPC), warp tour:±100 mm,rectifying precision;±0.5 mm;
14.Two colors gravure printing;
15. Printing Drying: Electric heating, single set of automatic constant temperature control, enabling the printing colors;
16. Installed version: None shaft gas cap loading, quick change, accurate positioning;
17.Printing diameter:φ130~φ300mm;
18. Registering accuracy; vertical ± 0.2mm, lateral ± 0.2mm;
19.Fixed blade series;± 10 mm;pneumatic control clutch;
20. Pneumatic roller for unwind and rewind;3 inch (φ73mm);
21.Imported PLC modal system controlled unwinding tension, printing, coating speed(low full load starting, automatic growth),rewinding tension, etc;
22. Rewinding system uses a two-axle duplex-rollover broadcasting form, change the volume high speed throttle, cropped, tension with the most advanced vector frequency conversion motor control (PLC module control,taper tension) technology;
23.Extruder base adopts light rail ,can move back and forth, reliable and durable, and a positioning device;
24.Rewinding counts meter automatically;
25.Max unwinding diameter 1000 mm, Max rewinding diameter 1200 mm;
26.The screw and barrel adopts ceramic heater;(Each zone is equipped with ammeter and leakage circuit break overload protection);
27.The mould adopts stainless steel internal heater;(Each zone is equipped with ammeter and leakage circuit break overload protection);
28. Total power: 230 Kw;
29. Overall size (L×W×H): 14400mm×9600mm×3200(mm);
30.Total weight: about 24000kg.

CONTACT US

Add:No.165 Yungu Road, Zhutang Town, Jiangyin City, Jiangsu Province, China
Tel:86-0510-86395222 86383688 86381535
Fax:86-0510-86381260
E-mail:sales@jiangnanmach.com